Futurliner Progress photos for 3/2/03.

GM Futurliner Progress Photos
GM Futurliner Restoration Project
National Automotive and Truck Museum of the United States

HOME
Status
Schedule
Photos:
2012 - 2011
2010 - 2009
2008 - 2007
2006 - 2005
2004 - 2003
2002 - 2001
2000 - 1999

2003 - Progress & Work Photos - 2003
The Way It Looks 1/1/2003 Bottom Half Painted Work Session 1/21 Carbs Session 1/28 Kalamazoo Swap Meet 2/1 Session 2/4 Session 2/11 Session 2/18 Session 2/24 Final Paint 3/4 Session 3/11	Session 3/18 Paint Progress Session 3/25 Session 4/1 Session 4/8 Lady In Red Ready for Trim Adding the Trim GM Letters Session 4/21 Session 4/22 Session 4/29	Session 4/30 Session 5/5 Session 5/6 Session 5/12 Session 5/19-20 Session 5/24 Session 6/2-3 Test Drive 6/9 Wheel Falls Off 6/9 Prepared to Travel 6/16 Eyes on Design 6/23 Lowboy Trailer 9/30	Light Housing 10/21 Wiring 10/21 Weather Seals 10/21 Electrical 10/28 Session 11/4 Session 11/11 Tire Mold 11/18 Session 11/24 Session 12/8 Last Session for '03


Project director Don Mayton holds a strategy meeting before the work session for the day.
Howard Sullivan attaching fasteners.	Rubber molding strips being applied.
Tom Kuhlman And Del Carpenter in engine compartment finalizing engine and trans alignment.	Tom and Del from right side
Art Miedema is working on the right side of the Futurliner.	Art is doing some final prep work before the primer is applied.
Art Miedema final-finishing the side for primer.	Don Mayton and Bud Dinger (plaid shirt) cut long rubber molding strips. Howard and Marty are working on various other tasks.
Look into the Futurliner from the rear.	Dick Saddler (on back) and Marty Reed install the under-carriage splash guards. Howard is working on a door.
Marty Reed and Dick Saddler fabricate a splash pan to protect engine compartment.	Del Carpenter working in the engine compartment.